CAMINO-108
2W AIS class B transceiver
Next generation class B AIS transponder, setting new standard for quality, performance, and value.
- Fully certified high-performance AIS Class B transponder
- NMEA 2000, NMEA 0183, and USB connectivity
- Support SD data logger card slot
- Support Dual GPS Backup from NMEA 2000 and NMEA 0183
- Compact and stylish housing design
- Optional silent mode (Tx off) operation
SKU Part Number::AMEC-B108-140
Overview
The solid AIS class B you can rely on
The CAMINO-108 series represents our globally approved CSTDMA class B transceivers with the core of sophisticated software defined radio technology.
Real AIS Power for Your Safety
Its robust transmission and reception performance makes sure that you can see other vessels and be seen by them even in a busy sea area. The unleashed AIS performance is packed in a compact housing to make CAMINO-108 series the smallest AIS Class B of the world for easy and pleasant installation.
Dual GPS Backup
CAMINO-108 series works with GPS input from both NMEA 2000 and NMEA 0183 to back up your external GPS antenna. The “Dual GPS Backup” actively ensures the positioning and transmission of your AIS transponder.
Versatile connectivity for easy integration
Camino-108 incorporates waterproof NMEA2000, NMEA0183 and USB port to enable simple integration with chart plotters, MAC and PC. Its built-in SD card slot makes storage of AIS data easier than ever. The AMEC AIS configuration tool enables an easy setup of vessel static data for Windows and Mac users and offers a variety of tools for diagnosis and installation troubleshooting.
Powerful 72-channel GNSS receiver embedded
The AIS transceiver is equipped with 72-channel high speed GNSS receiver. It supports GPS and Galileo by default and optional BeiDou and GLONASS.
Specification
APPLICABLE STANDARDS | |
IEN 301 489-1 V2.1.0 / EN 301 489-3 V2.1.0 | ITU-R M.1371-5:2014 |
EN 301 489-1 V2.1.0 / EN 301 489-17 V3.1.0 | IEC 60945 Ed. 4:2002 |
EN 301 843-1 V2.1.1 / EN 301 843-2 V2.1.1 | IEC 61108-1 Ed. 2:2003 |
EN 300 440 V2.1.1 | IEC 62287-1 Ed. 3:2017 |
EN 62368-1:2014 + A11:2017 | EN 62311:2008 |
EN 300 328 V2.1.0 | |
VHF TRANSCEIVER | |
Frequency Range | 156.025 MHz ~ 162.025 MHz |
Channel Bandwidth | 25 KHz |
Modulation | GMSK / FM |
Data Rate | 9,600 bps |
Number of AIS Transmitter | 1 |
Number of AIS Receiver | 2 (one time-shared between AIS and DSC) |
Number of DSC Receiver | 1 (time-shared between AIS and DSC) |
AIS Channel 1 | CH 87B (161.975 MHz) |
AIS Channel 2 | CH 88B (162.025 MHz) |
Tx Power Output | 2 Watt (33 dBm ± 1.5 dB) |
Rx Sensitivity | < -107 dBm @ 20% PER |
DSC RECEIVER | |
Modulation | 1,300 Hz / 2,100 Hz FSK |
Data Rate | 1,200 bps ± 30 ppm |
Spurious Response Rejection | ≧70 dB for signal @ -104 dBm; BER≦1 % |
Blocking | ≧84 dB for signal @ -104 dBm; BER≦1 % |
GNSS RECEIVER (integrated) | |
Receiving Channels | 72channels |
Accuracy | IEC 61108-1 compliant |
GNSS support: GPS & GLONASS (factory default) | |
ENVIRONMENTAL | |
Operating Conditions | IEC 60945 “protected” category |
Operating Temperature | -15°C ~ +55°C (+5°F ~ +130°F) |
Waterproof | IP2X |
LED INDICATION | |
Power (green) | System power on / off |
Error (red) | MMSI not set / BIIT error |
Rx (green) | Receiving AIS data |
Tx/Silent (green/red) | Transmitting AIS data / Silent mode |
SD (green) | Accessing SD card |
CONNECTION INTERFACE | |
GPS Antenna Connector | TNC (Female) |
VHF Antenna Connector | SO-239 (Female) |
NMEA2000 | Standard connector |
NMEA 0183 (RS-422) | Support two NMEA0183 interfaces Baud rate configurable (default 38,400 bps) Separate Tx/Rx baud rate Standard IEC 61162-1 / IEC 61162-2 sentences |
Silent Mode Setting | Set by dedicated pins in NMEA0183 connector |
USB | Mini type, waterproof |
POWER SUPPLY | |
Supply Voltage | 12V / 24V DC |
Power Consumption | Typically less than 3W average @ 12V DC |
PHYSICAL | |
Width | 128 mm (5.03 inch) |
Height | 36 mm (1.40 inch) |
Depth (include connectors) | 88 mm (3.46 inch) (exclude connector) |
Weight | 250 g |
SOFTWARE TOOL | |
AMEC AIS Configuration | PC configuration utility |
AMEC AIS Viewer | AIS Viewer for PC |
In the Box
FAQ
Q1.How to connect CAMINO-108 to external RS-232 device?
Q2.How do I install CAMINO-108/W/S Windows Driver on my PC?
Q3.The transmitting LED (Green color) is not illuminated, why?
Q4.The Red Error LED indication at CAMINO-108 is illuminated, why?
Q5.CAMINO-108 receives AIS signals normally, but no one in the surrounding can see me, why?
Q6.Even though my CAMINO-108 is transmitting, why do some vessels with AIS take a long time to see my vessel name or not see it at all?
Q7.My MMSI is being received by other vessels but my vessel name is not shown on their chart plotter or PC, why?
Q8.No data is being received by chart plotter, why?
Q9.The silent mode (Tx off) on CAMINO-108 is not working, why?
Q10.What are the updated NMEA2000 PGN CAMINO-108/108W/108S supports?
Q11.What NMEA0183 sentences does CAMINO-108/108W/108S support?
Q12.What type of SD-card and maximum memory size can I use?
Q13.What navigation information will the SD data logger of CAMINO-108/108W/108S record?
Q14.Where can I download the Free complimentary App for my CAMINO-108W?
Q15.How do I operate the complimentary AMEC AIS App?
Q16.Can I change the SSID of the CAMINO-108W?
Q17.Can I change the Wi-Fi password of CAMINO-108W?
Q18.How many devices can be pair with CAMINO-108W?
Q19.Can I connect CAMINO-108W to my existing router?
Q20.Where can I obtain further technical support?
Q21.How to display AIS Targets on your Macintosh via OpenCPN?
Q22.What to do when your AIS Class B transponder is assigned with a Com Port number which already exists in Windows system?
Download
Documents
DESCRIPTION | UPDATE |
AIS Class B CAMINO-108 product brochure v2.3 | 2016/12/07 |
Declaration of EU Conformity for CAMINO-108/108W/108S | 2020/12/30 |
CAMINO-108 Manual V1.42 | 2020/12/30 |
Connecting your Transponder to Macintosh Installation Guide | 2016/04/01 |
Softwares
DESCRIPTION | UPDATE |
AIS ClassB Configuration V2.0.6 ( Windows / Mac) | 2021/05/07 |
AIS ClassB Firmware V1.2.8.11 | 2023/12/11 |
CAMINO-108 USB Driver | 2018/06/20 |
Related Items
Tx Switch Box SB-181Silent switch for AMEC AIS class B series (2W/5W)
PA-02GPS antenna installation made easy
GA-22Optimized for Your AIS Transponder
ANTENNA SPLITTER CUBO-162One VHF Antenna, Full Combination!